The JBL JRX-115I is a suspendable two-way speaker, with a 15" woofer and a 1" waveguide, horn-loaded tweeter, designed for installation where ground stacking or pole mounting is not a viable placement solution. The speaker is suited to a variety of sound reinforcement applications including live music, music playback and speech, in clubs, meeting halls, and other small- to mid-sized venues of this type.

• JBL 15" low frequency driver with a 64 mm (2-1/2 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater effi- ciency and power handling.
• Ferro-fluid cooled compression driver with titanium diaphragm improves high frequency performance as well as system reliability.
• The advanced network topology crossover design shapes the frequency response to deliver coherent summation in the crossover region.
• High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
• Progressive TransitionT highfrequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
• The rugged, acoustically superior enclosure is constructed from 19 mm (3/4 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
• SonicGuardT protects the highfrequency driver from excess power without interrupting the performance. Attractive 18-gauge perforated, steel grille protects components from damage.
• Cabinet is fitted with three M10 threaded suspension points.
• Rigging hardware kit containing three 10 mm forged shoulder eyebolts with washers is included.

• System Type: 15" 2-way, sound reinforcement speaker
• Frequency Range (-10 dB):2 38 Hz - 16 kHz
• Frequency Response (ñ3 dB):2 50 Hz - 12.5 kHz
• Sensitivity (1w/1m): 98 dB SPL
• Nominal Impedance: 8 Ohms
• Power Capacity: 250 watts
• Peak Power Capacity: 1000 watts
• Maximum SPL: 128 dB
• Nominal Dispersion: 90ø x 50ø
• Crossover Frequency: 1.6 kHz
• Dimensions (H x W x D): 686 mm x 470 mm x 432 mm (27.0 in x 18.5 in x 17.0 in)
• Weight: 27.4 kg (60.5 lb)
• Shipping Weight: 30.4 kg (67.0 lb)
• High Frequency Driver: JBL 2412, 1" exit compression driver mounted on Progressive TransitionT Waveguide
• Low Frequency Driver: JBL M115-8A
• Input Connectors: Parallel Neutrikr Speakonr NL-4 (x1); 1/4" TS phone jack (x1)
• Enclosure Construction: 19 mm (3/4 in) MDF (Medium Density Fiberboard); with glued and mechanically fastened joint detail; covered in black carpet.
• Grille: 18-gauge, powder-coated steel
• Suspension: 3x M10 threaded suspension points
• Suspension Kit: 3x 10 mm forged shoulder eyebolts with washers (included)